MIL-DTL-0048669A (AR)
6.6.5 Redundant inspection equipment. The contractor may elect to use redundant
inspection equipment in lieu of using a single piece of equipment with a very low error rate.
Where redundant equipment is used, the inspection system error rate is defined as the error rates
of the multiple pieces of equipment multiplied together.
6.6 Revision/Amendments History. The following is a record of changes incorporated
into this document
ECP
Description
Date
Approved
R2S3021
Add a hole to top plate per attached sketch
09/25/2002
R2S3018
Change test quantity identified in "Pin Retraction and Spring Removal Test"
07/31/2002
from 80 to 100 in paragraphs defining the test.
� Implementation of new setback pin and spring for the M550 escapement
R2S2021
07/01/2002
used in the M550 fuze and M918 TP.
� Clarification of the minimum arming time requirements in the item
specifications.
R1Q2005 Add an additional setback pin inspection.
03/06/2001
� Add setback spring height from the bottom of escapement housing
H0S2001
10/05/2000
� Add overall height of escapement housing
R04Q2022 Initial release of M550 escapement MIL-DTL specification
Aug 2004
6.7 Interim Revision This interim revision has been prepared at Program Manager
request to document in ASSIST Online the version of a draft specification that was placed on
contract in 2004. This interim revision has been dated to match the date of the draft
specification that was placed on contract. It has been modified slightly to comply with MIL-
STD-961 requirements for format, but not content. A fully coordinated revision, compliant with
both MIL-STD-961 format and content requirements, will be approved for publication.
6.8 Changes from previous issue. Marginal notations are not used in this revision to
identify changes with respect to the previous issue due to the extensiveness of the changes.
Preparing activity:
Army-AR
(Project 1390-2006-005)
NOTE: The activities listed above were interested in this document as of the date of this
document. Since organizations and responsibilities can change, you should verify the currency
of the information above using the ASSIST Online database at https://assist.daps.dla.mil.
20
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business