MIL-DTL-0050869F (AR)
3.4 Jolt. The fuze assembly shall be x-rayed and shall not be armed or partially armed
(as evidenced by the detonator moving any degree from safe position) or have any safety feature
missing or not in its proper position (i.e. detent, detent spring, setback pin, setback spring),
damaged parts or foreign material. After being subjected to the jolt test, the fuze assembly shall
be x-rayed again and shall not be armed or partially armed (as evidenced by the detonator
moving any degree from the safe position) or have any safety feature not in its proper position,
damaged parts or foreign material.
3.5 Jumble. The fuze assembly shall be x-rayed and shall not be armed or partially
armed ( as evidenced by the detonator moving any degree from the safe position) or have any
safety feature missing or not in its proper position (i.e. detent, detent spring, setback pin,
setback spring), damaged parts or foreign material. After being subjected to the jumble test, the
fuze assembly shall be x-rayed again and shall not be armed or partially armed (as evidenced by
the detonator moving any degrees from the safe position) or have any safety feature not in its
proper position, damaged parts or foreign material.
3.6 Functioning. The fuze as a component of the higher assembly, the M433 Cartridge
(Dwg. 8886371), shall meet all functioning requirements for that assembly.
3.7 Non-functioning. The fuze, as a component of the test vehicle (Dwg. 9287615),
shall not function as evidenced by the spitback not functioning high order (premature burst).
3.8 Ammunition lot numbering. Ammunition lot numbers shall be assigned in
accordance with MIL-STD-1168.
3.9 Workmanship. All parts and assemblies shall be fabricated and finished in a
thorough, workmanlike manner. They shall be free of burrs, chips, sharp edges, cracks,
unblended radii, surface defects, dirt, grease, rust, corrosion products and other foreign matter.
The cleaning method used shall not be injurious to any parts, nor shall the parts be contaminated
by the cleaning agents. All marking and stamping shall be neat and sharply defined.
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business