MIL-DTL-18714F (OS)
TABLE IX. Conformance inspection by classification of characteristics for epoxy, semi-flexible, drawing number 2596952
Conformance
Requirement
Inspection Method
Classification
Examination or Test
Criteria
Paragraph
Reference
Critical
None Defined
Major
M101
Note 3: Only the item described in this drawing when procured from the
Level IV
3.2
COC
vendor(s) listed hereon is approved by Indian Head Division, Naval Surface
Warfare Center, Indian Head, Maryland 20640-5035 for use in the
application(s) specified hereon. A substitute item shall not be used without
prior testing by Indian Head Division, Naval Surface Warfare Center, Indian
Head, Maryland 20640-5035 or Naval Sea Systems Command.
Minor
201
Note 2: Material: this resin shall be a two part system having a mixing ratio
Level II
3.2
COC
by weight of one to one, and a specific gravity of 1.08. It shall have an initial
viscosity of 7000 cps and a gel time of approximately 30 minutes at 60°C.
Curing time will vary from 24 to 48 ambient temperatures to a minimum of
one hour at 95°C.
18
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business